The Blue Crane Takeoff Engine reads a construction drawing set and turns it into a material takeoff for each trade and an editable proposal for each trade. It sorts the sheets, measures the walls at the drawing's scale, reads the door, room and finish schedules, and prices every material line from your own price list first and public supplier listings after. You start with the material cost and add your own price before anything reaches a client. It runs on its own or inside an app we build for you.
Verified against the engine's run on our own sample set and its audit of five real drawing sets
- Framing and drywall
- Ceilings
- Doors and hardware
- Paint
- Flooring
| Material | How many | Each | Total |
|---|---|---|---|
| 3-5/8 in steel stud, 10 ft | 186 pcs | $14.26 | $2,652.36 |
| 3-5/8 in steel track, 10 ft | 49 pcs | $14.00 | $686.00 |
| 1/2 in drywall, 4 x 10 | 112 sheets | $21.75 | $2,436.00 |
| Acoustic insulation, 3 in, 64 sq ft bag | 19 bags | $120.63 | $2,291.97 |
| All-purpose compound, 17 L | 9 cartons | $35.25 | $317.25 |
| Paper tape, 500 ft | 3 rolls | $11.32 | $33.96 |
| Outside corner bead, 10 ft | 6 pcs | $8.90 | $53.40 |
| Drywall screws 1-1/4 in, box of 8,000 | 1 box | $105.00 | $105.00 |
| Framing screws #8 x 1/2 in, box of 100 | 8 boxes | $7.95 | $63.60 |
| Acoustic sealant, 295 mL | 16 tubes | $7.59 | $121.44 |
| Powder-actuated pins, box of 100 | 2 boxes | $10.65 | $21.30 |
| Powder loads, box of 100 | 2 boxes | $26.95 | $53.90 |
| Material cost, before tax and delivery | $8,836.18 | ||
Question for you: plan A1.0 gives no wall height, so it was counted at 10 ft and asked here for you to confirm.
PROPOSALFraming and drywall · sample
To: Sample Client Inc. · Unit 4 clinic fit-out
Scope of work
- Supply and install 3-5/8 in steel stud partitions at 16 in on centre, 10 ft high: 220 linear feet.
- 1/2 in drywall both sides, taped, filled and sanded, ready for paint.
- Acoustic insulation in the exam room walls.
- Frame 8 door openings to the door schedule.
Not included
Paint, doors and hardware, electrical, plumbing, permits.
Your price, plus HST $ you type it
- You start with material cost. The takeoff hands you $8,836.18 of material for this trade.
- You add your price. Labour, overhead and margin are yours. Type the number your client sees.
- Every word is editable. The scope is written from the takeoff; change anything before it goes.
- One proposal per trade, or one for the job. Combine trades, finalize, email it, and the client signs online.
How does a drawing set become a proposal?
- Drop the set in. PDFs or a zip, the way the architect sent it, and name the job.
- It sorts the sheets. Each sheet is named by number and discipline: the plans, the ceilings, the finishes, the schedules, the mechanical and electrical.
- It reads what the drawings say. The wall type legend, the door, room and finish schedules and the ceiling plan, read as text, not guessed from a picture.
- It measures. On a plan drawn with CAD layers, every new wall is measured between its faces at the drawing's scale. A machine reads the drawings; plain code does the counting.
- It splits the work by trade and counts the material. Studs by the length, board by the sheet, screws by the box: rounded up to what a yard actually sells.
- It prices every line. Your own prices go first, typed once. Anything you have not priced comes from public supplier listings in your region, and each line says where its price came from and the day it was read.
- It drafts a proposal per trade. The scope is written from the takeoff. You edit the words, type your price, combine trades if you want one proposal, finalize and email it. The client signs online, which Ontario law accepts for a contract like this (Electronic Commerce Act, 2000).
Anything the drawings leave out, like a wall height or a board gauge, comes back as a question with the number it assumed, so you see the guess instead of trusting it.
Email us to add itWrite to info@bluecraneworks.ca with what you build and, if you can, a drawing set you would like us to run. Want to see it first? You can request a takeoff demo.
The grind
- Days on one drawing set before the first number is written down
- Scaling walls and counting doors by hand, sheet after sheet
- The same proposal rewritten for every trade on the job
- Material prices remembered from the last job instead of checked
- Bids that never went out because the takeoff was not done in time
You start with material cost. You add your price.
The engine prices materials, never your work. What it hands you is what the job needs in stud, board, tile, paint and hardware, and what that material costs at the prices it shows. It does not know your crew, your overhead or your margin, and it does not pretend to. On every proposal there is one price, and you type it.
That is on purpose. The material count is the slow, error-prone part of a bid, and it is the part a machine can do well. The price is your judgment about your company, and it stays yours. So the proposal goes out at your number, written in your words, under your name.
How much time does it save?
On our own made-up three-sheet clinic set, the engine was ready in 1 minute 55 seconds: 244 feet of new wall measured, seven trades, a priced material list for each, and a proposal for each trade written by itself. Measured against the answer key we drew the set from, the wall count was exact.
A real set is bigger and takes longer, but the reading runs while you are on site, and several jobs can run side by side. What used to be days of counting and writing before a proposal could go out becomes an hour of checking, pricing and sending. The work you do changes from building each proposal to reviewing ones that are already drafted.
What does it catch in the drawings?
While it reads, it checks the set against itself, because a mistake in the drawings becomes a mistake in your price:
- A dimension written one length and drawn another, at the sheet's own scale
- Millimetres and feet that disagree on the same dimension
- A string of dimensions that does not add up to its overall
- One room number given two names, or two rooms given one
- Door tags on the plans against the door schedule
- A door or fixture that no longer fits the written length of its wall
Each one comes back as a question already worded for the architect: keep it or skip it, edit the words, then copy, email or print the list. On the five drawing sets we have audited, it raised four real problems and no false ones, and errors we planted in a copy of a set were caught. The same check runs in the 3D Field Engine, where each conflict is a red marker on the model.
What we build
Every sheet named by number and discipline, the schedules and legends read as text, the plans measured at their own scale.
Framing and drywall, ceilings, doors and hardware, paint, flooring and the rest, each with its own material list you can download or email.
Your prices first. Public supplier listings in your region for the rest, each line saying where the price came from and when it was read.
Studs by the length, board by the sheet, compound by the carton, screws by the box. No 0.37 of a sheet.
Scope written from the takeoff, your words, your price, your terms. Combine trades, finalize, email, signed online.
Conflicts and missing information as a worded list to keep, edit and send, instead of a surprise on site.
What does the Takeoff Engine cost?
$150 a month, added to your app. The engines are add-ins to the app we build for you, so your bill is your app's own monthly plan plus the engines you add. Every engine works the same way. If your work is much bigger or smaller than usual, the price is adjusted to its scope, in writing, before anything is signed.
The 3D Field Engine can go on top of the Takeoff Engine as a low-cost extra, priced to your work. There is no buy button: email info@bluecraneworks.ca and we set it up with you. The app itself is on the pricing page, from $249 a month Care. CAD, plus HST.
Can I use it on its own?
Yes. If a takeoff engine is all you need, it runs on its own: your sign-in, your job folders, your price list, your proposal wording. Drawings in, material lists and proposals out. Email us and we quote it on its own, in writing.
If you want more later, nothing gets thrown away. The same engine is a part we build into a Nameplate app, your company's own app, with clients, scheduling, invoices and everything else your office runs on.
Can it be added to the app I already have?
Yes. Everything we make can be added to an app we built for you. That is how most of our clients get it: they ask, and it goes into the app they already use, under their own name. Cruzz Construction, Reborn Renos, JDT Construction and Jackman Mechanical each run an app we built, and each has had parts added to it as they asked for them. Cruzz Construction's app takes drawing sets in and makes the takeoff and a proposal for each trade; Jackman Mechanical's app carries the 3D Field Engine.
Where does it stop today?
We would rather you hear this from us. On a plan drawn with CAD layers, walls are measured and the count is exact. Many real sets arrive as flattened PDFs with no layers, and there the walls are found from the lines of the drawing: the takeoff is a strong start, not yet a number to bid with until you check it. The engine shows its work, drawing every wall it counted over the plan, so checking takes minutes. Heights the drawings do not give are asked, not hidden.
Are my drawings and proposals private?
Yes. Drawings, takeoffs and proposals live inside your own app, behind your sign-in, and never on a public page. The mock above is a made-up job drawn for this page. Your app runs on Microsoft Azure, on infrastructure we operate; our data page has the full picture.
What it replaces
- Scaling and counting by hand
- A spreadsheet takeoff rebuilt for every bid
- Copy-pasted proposals, one per trade
- Guessing at material prices
Who it is for
General contractors, builders and estimators in Ontario who price from drawings: commercial fit-outs, tenant improvements, institutional work and residential builds. Also trades pricing their own scope from a full set.
What week one looks like
- We run one of your past drawing sets with you, so you can hold the takeoff against the one you already did.
- Your price list goes in, with your supplier's prices first.
- Your proposal wording, terms and deposit schedule go in.
- Your next live bid runs through it, and you check it before it goes out.